FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.thresholdAlerts.setState
193CLI Reference Guide for Directors and Edge Switches
Syntax
setState name enabledState
Purpose
This command sets the enabled state of the specified counter threshold alert.
Parameters
This command has the following parameters:
Command Example
Root> perf thresholdAlerts setState checklinks enabled
perf.thresholdAlerts.setState
name The name of a counter threshold alert as
defined by the command
“perf.thresholdAlerts.counter.addAlert” on
page 183.
enabledState Sets the counter threshold alert enabled state.
Valid values are enabled and disabled.
Boolean 1 and 0 values may also be
substituted.