FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

perf.thresholdAlerts.throughput.addPort
197CLI Reference Guide for Directors and Edge Switches
Parameters
This command has the following parameters:
Command Example
Root> perf thresholdAlerts throughput addPort eportRx eport
name The name of a throughput threshold alert as
defined by the command
“perf.thresholdAlerts.throughput.addAlert” on
page 194.
portNumber Specifies the port number or port type. Valid
values are either a single port number, all
ports, or port type. The following port
numbers are valid:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0-23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
all applies the throughput threshhold alert to
every port on the product.
Specifying a port type removes all the ports
from the alert and applies the alert to each port
that is the specified type of port. Valid values
are:
■ eport
■ fport
■ flport (Edge Switch 2/12 or 2/24)
A counter threshold alert is not allowed to
specify both port types and individual port
numbers.