FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
212 CLI Reference Guide for Directors and Edge Switches
Syntax
nodes
Purpose
This command displays a list of all fabric-attached nodes.
Parameters
This command has no parameters.
Command Example
Root> show fabric nodes
Output
The data is displayed as a table that includes the following properties:
Output Example
The output from the show.fabric.nodes command displays as follows.
Domain ID Node WWN
--------- -----------------------
2 12:34:7C:CC:57:86:37:23
2 98:45:75:25:7B:35:30:34
2 27:35:3E:69:63:34:22:11
2 29:81:24:74:57:32:48:98
6 25:F2:35:7A:25:22:11:0B
18 F1:23:96:43:56:A3:AA:12
18 45:4D:2B:22:62:9B:19:91
show.fabric.nodes
Domain ID Domain ID of the switch to which the device is
attached.
Node WWN The WWN of the fabric attached node.