FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

show.features
215CLI Reference Guide for Directors and Edge Switches
Syntax
features
Purpose
This command displays a table of all installed feature sets and their states. This
command provides the same output as the command “config.features.show” on
page 48.
Parameters
This command has no parameters.
Command Example
Root> show features
Output
The features data is displayed as a table that includes the following properties:
show.features
Installed Feature Set The feature set installed using a feature key. Only
installed keys are displayed.
Feature Individual features within each set. In many cases,
there is only one feature within each feature set.
State The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
Switch-centric features are displayed as
Enabled/Disabled.