FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

show.ip.ethernet
219CLI Reference Guide for Directors and Edge Switches
Syntax
ethernet
Purpose
This command displays Ethernet attributes.
Parameters
This command has no parameters.
Command Example
Root> show ip ethernet
Output
The Ethernet attributes data are displayed as a table that includes the following
properties:
Output Example
The output from the show.ip.ethernet command displays as follows:
LAN Information
IP Address: 144.49.10.15
Gateway Address: 144.49.10.1
Subnet Mask: 255.255.255.0
show.ip.ethernet
IP Address The IP address for the Ethernet adapter as set in the
config.ip.ethernet command.
Gateway
Address
The gateway address for the Ethernet adapter as set in the
config.ip.ethernet command.
Subnet Mask The subnet mask for the Ethernet adapter as set in the
config.ip.ethernet command.