FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
220 CLI Reference Guide for Directors and Edge Switches
Syntax
linkIncidentLog [clear]
Purpose
This command shows the contents of the link incident log on the director or
switch.
Note: If the switch is restarted (as occurs during IPL, IML, configuration reset, feature
key installation, or firmware load) or is power cycled, the information in the link
incident log is lost.
Parameters
This command has one parameter.
Command Example
Root> show linkIncidentLog
Output
The event log data are displayed as a table that includes the following properties:
show.linkIncidentLog
clear This optional parameter causes all link incident
log entries to be cleared.
Date/Time The date and time when the event occurred.
Port The number of the port where the link incident
occurred.
Link Incident
Event
An ASCII string describing the link incident
event.