FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
222 CLI Reference Guide for Directors and Edge Switches
Syntax
loginServer
Purpose
This command displays information from the login server database for devices
attached to this switch.
Note: It is possible to have more than one device per port for any public loop devices
attached to an FL_Port.
Parameters
This command has no parameters.
Command Example
Root> show loginServer
Output
The device information is displayed as a table that includes the following
properties:
show.loginServer
Port The port number where the device is attached.
BB Crdt The maximum number of remaining frames that can be
transmitted without causing a buffer overrun condition at
the receiver.
RxFldSz The buffer-to-buffer receive data field size from the
FLOGI received from the attached N_Port.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2;
2,3).
Port Name The port World Wide Name of the attached device.
Node Name The node World Wide Name of the attached device.