FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
224 CLI Reference Guide for Directors and Edge Switches
Syntax
nameServer
Purpose
This command displays information from the name server database for devices
attached to this switch.
Note: It is possible to have more than one device per port for any public loop devices
attached to an FL_Port.
Parameters
This command has no parameters.
Command Example
Root> show nameServer
Output
The device information data is displayed as a table that includes the following
properties:
show.nameServer
Type The type (N, NL, F/NL, F, FL, E, B).
Port Id The 24-bit Fibre Channel address.
Port Name The port World Wide Name of the attached device.
Node Name The node World Wide Name of the attached device.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2;
2,3).
FC4 Types The FC4 types registered for this device. One or more
numbers display in this field.
The numbers in this field correspond to the list at the
bottom of the table.