FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
226 CLI Reference Guide for Directors and Edge Switches
Syntax
nameServerExt
Purpose
This command displays extended information from the name server database for
devices attached to this switch. The command provides symbolic nameserver
information, as well as the same information as the show.nameServer
command. Multiple devices per port are possible for any public loop device
attached to an FL Port.
Note: Because it contains symbolic nameserver information that can be lengthy, the
CLI output wraps several times per node. For this reason, this command is supported
only in comma-delimited mode.
Parameters
This command has no parameters.
Command Example
Root> show nameServerExt
Output
The device information data is displayed as a table that includes the following
properties:
show.nameServerExt
Type The type (N, NL, F/NL, F, FL, E, B).
Port Id The 24-bit Fibre Channel address.
Port Name The port World Wide Name of the attached device.
Node Name The node World Wide Name of the attached device.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F;
1,2; 2,3).