FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
228 CLI Reference Guide for Directors and Edge Switches
Syntax
config
Purpose
This command displays the trunking configuration for all ports.
Parameters
This command has no parameters.
Command Example
show openTrunking config
Output
The device information data is displayed as a table that includes the following
properties:
show.openTrunking.config
Unresolved
Congestion
The current enabled/disabled state of the
unresolved congestion trunking feature.
Backpressure The current enabled/disabled state of the
backpressure trunking feature.
Low BB Credit
Threshold Table
The current threshold setting of the low BB credit
threshold trunking feature shown as a percentage.
If this value is configured to be the default,
(default) is displayed alongside the threshold
value. The default value is 75%.
Congestion
Threshold Table
A table mapping each port number on the switch to
a corresponding threshold setting. The threshold is
listed as a percentage. If this value is configured to
be the default, (default) is displayed alongside
the threshold value. The default value is 60%