FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)
show.port.status
243CLI Reference Guide for Directors and Edge Switches
If the operational state is Invalid Attachment,
only the following messages can be generated:
■ 09 Unknown
■ 10 ISL connection not allowed on this port
■ 11 ELP rejected by the attached switch
■ 12 Incompatible switch at other end of the ISL
■ 13 External loopback adapter connected to the
port
■ 14 N_Port connection not allowed on this port
■ 15 Non-HP switch at other end of the ISL
■ 16 ISL connection not allowed on this port
■ 17 ISL connection not allowed to external Fabrics
■ 18 Port binding violation—unauthorized WWN
■ 19 Unresponsive Node Connected to Port
■ 20 Incompatible security attributes
■ 21 Fabric Binding violation
■ 22 Authorization failure
■ 23 Switch Binding violation
If the operational state is Inactive only the
following messages can be generated:
■ 24 Inactive – RC 0
■ 25 No Serial Number
■ 26 Feature Not Enabled
■ 27 Switch Speed Conflict