FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

show.thresholdAlerts.alert
261CLI Reference Guide for Directors and Edge Switches
Syntax
alert
Purpose
This command provides the name, type, and enabled state of each threshold alert.
This command displays information about all threshold alerts, including both
counter threshold alerts (CTAs) and throughput threshold alerts (TTAs).
Parameters
This command has no parameters.
Command Example
Root> show thresholdAlerts alert
Output
The threshold alert data displays as a table that includes the following properties:
show.thresholdAlerts.alert
Name The name of the threshold alert, truncated to 45
characters.
Type The trigger statistic or threshold type of the alert
(abbreviated to 17 characters). These include:
Tx Util TTA - Transmit Utilization
Rx Util TTA - Receive Utilization
Tx/Rx Util TTA - Transmit or Receive
Utilization
Link Resets Sent CTA - Link Resets Sent
Link Resets Received CTA - Link Resets Received
OLS Sent CTA - OLS Sent
OLS Received CTA - OLS Received
Link Failures CTA - Link Failures
Sync Losses CTA - Sync Losses