FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

269CLI Reference Guide for Directors and Edge Switches
A
Error Messages
This appendix lists and explains error messages for the command line interface
(CLI). Any error numbers that are not listed are reserved for future use.
The message that is returned is a string that includes the error number and the text
of the message.
Table 6: CLI Error Messages
Message Description Action
Error 05: Busy The switch is busy or
processing another
request.
After a few seconds,
reissue the request.
Error 08: Invalid Switch
Name
The value entered for the
switch name is invalid.
The name for a director
or edge switch can
contain 0–24 characters.
Enter a name with 0–24
characters. If spaces are
used, enclose the name in
quotation marks.
Error 09: Invalid Switch The value entered for the
switch description is
invalid.
The description for the
director or edge switch
can contain 0–255
characters. Enter a
description with 0–255
characters. If spaces are
used, enclose the
description in quotation
marks.
Error 10: Invalid Switch
Location
The value entered for the
switch location is invalid.
The location for the
director or edge switch
can contain 0–255
characters. Enter a
location with 0–255
characters. If spaces are
used, enclose the location
in quotation marks.