FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
270 CLI Reference Guide for Directors and Edge Switches
Error 11: Invalid Switch
Contact
The value entered for the
switch contact is invalid.
The contact for the
director or edge switch
can contain 0–255
characters. Enter a
contact with 0–255
characters. If spaces are
used, enclose the contact
in quotation marks.
Error 13: Invalid Port
Number
The value entered for the
port number is invalid.
Enter a port number
within the range
supported by the director
or edge switch. Valid
values are:
■ 0-11 for the Edge
Switch 2/12
■ 0–15 for the Edge
Switch 2/16
■ 0–23 for the Edge
Switch 2/24
■ 0–31 for the Edge
Switch 2/32
■ 0–63 for the Director
2/64
■ 0–127 and 132–143
for the Director
2/140
Error 14: Invalid Port
Name
The value entered for the
port name is invalid.
The port name for the
individual port can
contain 0–24 characters.
Enter a name with 0–24
characters. If spaces are
used, enclose the name in
quotation marks.
Error 15: Invalid BB
Credit
The value entered for the
buffer-to-buffer credit is
invalid.
The buffer-to-buffer credit
must be an integer in the
range 1–60. Enter a
value in the range 1–60
characters. A
buffer-to-buffer credit is
not used for ports
configured for extended
distance.
Table 6: CLI Error Messages (Continued)
Message Description Action