FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config

Error Messages

271CLI Reference Guide for Directors and Edge Switches

Error 16: Invalid

R_A_TOV

The value entered for the

resource allocation

time-out value is invalid.

The R_A_TOV is entered

in tenths of a second and

must be an integer in the

range 10–1200 (1

second to 120 seconds).

The R_A_TOV value must

be larger than the

E_D_TOV value. Check to

be sure that all these

conditions are met and

re-submit.

Error 17: Invalid

E_D_TOV

The value entered for the

error detect time-out

value is invalid.

The E_D_TOV is entered

in tenths of a second and

must be an integer in the

range 2–600 (0.2 second

to 60 seconds). The

E_D_TOV value must be

smaller than the

R_A_TOV value. Check

to be sure that all these

conditions are met and

re-submit.

Error 18: Invalid TOV The E_D_TOV and

R_A_TOV values are not

compatible.

Enter a valid

E_D_TOV/R_A_TOV

combination. The

E_D_TOV must be

smaller than the

R_A_TOV.

Error 20: Invalid

Preferred Domain ID

The value entered for the

preferred domain ID for

the director or edge

switch is invalid.

The preferred domain ID

must be an integer in the

range 1–31. Enter an

appropriate value and

resubmit.

Error 21: Invalid Switch

Priority

The value entered for the

switch priority is invalid.

The switch priority

entered for the director or

switch must be

principal, default,

or neverprincipal.

(Refer to the description

of the command

“config.switch.priority”

on page 109.) Enter

principal, default,

or neverprincipal.

Table 6: CLI Error Messages (Continued)

Message Description Action