FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
273CLI Reference Guide for Directors and Edge Switches
Error 33: Invalid SNMP
Trap Address
The value entered for the
SNMP trap address is
invalid.
The new SNMP trap
address for the SNMP
interface must be entered
in dotted decimal format
(for example, 10.0.0.0).
Enter an SNMP trap
address that meets the
requirements.
Error 34: Duplicate
Community Names
Require Identical Write
Authorization
The two or more entered
community names are
identical, but their
corresponding write
authorizations are not
identical.
Enter different values for
the community names, or
enter identical write
authorizations for the
duplicate community
names.
Error 37: Invalid Month The value of the month
entered for the new
system date is invalid.
The format of the date
parameter must be
mm:dd:yyyy or
mm/dd/yyyy. The month
must contain an integer in
the range 01–12. Enter a
date, including a month
in the range 01–12.
Error 38: Invalid Day The value of the day
entered for the new
system date is invalid.
The format of the date
parameter must be
mm:dd:yyyy or
mm/dd/yyyy. The day
must contain an integer in
the range 01–31. Enter a
date, including a day in
the range 01–31.
Error 39: Invalid Year The value of the year
entered for the new
system date is invalid.
The format of the date
parameter must be
mm:dd:yyyy or
mm/dd/yyyy. The year
must contain an integer
greater than 1980. Enter
a date, including a year
greater than 1980.
Table 6: CLI Error Messages (Continued)
Message Description Action