FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
275CLI Reference Guide for Directors and Edge Switches
Error 55: Invalid Zone
Name
The value entered for the
zone name is invalid.
The zone name must
contain 1–64 characters.
Valid characters are
ABCDEFGHIJKLMNOPQ
RSTUVWXYZabcdefghijkl
mnopqrstuvwxyz012345
6789$-^_ (spaces are
not permitted, and the
first character must be
alphabetical). Enter a
zone name in the range
of 1–64 characters, using
the valid characters.
Error 57: Duplicate Zone Two or more zone names
in the zone set are
identical.
All zone names within a
zone set must be unique.
Enter a zone name that
does not duplicate the
name of another zone
within the zone set.
Error 59: Zone Name in
Use
Two or more zone names
in the zone set are
identical.
All zone names within a
zone set must be unique.
Enter a zone name that
does not duplicate the
name of another zone
within the zone set.
Error 60: Invalid Number
of Zone Members
The entered command
tried to add more zone
members than the zone
can hold.
Delete one or more zone
members in the zone,
and then resubmit the
command to add the new
zone member.
Error 61: Invalid Zone
Member Type
The specified zone
member is neither a
World Wide Name
(WWN) nor a
domain-port pair.
The zone member type
must be either a World
Wide Name (WWN) or
a
domain-port pair. Refer
to the command
“config.zoning.addWwn
Mem” on page 135 or
“config.zoning.addPortM
em” on page 136 for
specific requirements.
Enter either a WWN or
domain-port pair that
meets the requirements.
Table 6: CLI Error Messages (Continued)
Message Description Action