FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
276 CLI Reference Guide for Directors and Edge Switches
Error 62: Invalid Zone Set
Name
The value entered for the
zone set name is invalid.
The zone set name must
contain 1–64 characters.
Valid characters are
ABCDEFGHIJKLMNOPQ
RSTUVWXYZabcdefghijkl
mnopqrstuvwxyz012345
6789$-^_ (spaces are
not permitted, and the
first character must be
alphabetical). Enter a
zone set name in the
range of 1–64
characters, using the
valid characters.
Error 69: Duplicate Port
Name
Two or more port names
are identical.
Port names must be
unique. The name must
contain 1–24 characters.
Enter a port name in the
range of 1–24
characters.
Error 70: Invalid Device
Type
The specified FRU does
not exist on this product.
Refer to the product
service manual for
product-specific FRU
information.
Error 71: FRU Not
Installed
The specified FRU is not
installed.
Refer to the product
service manual for
product-specific FRU
information and
procedures.
Error 72: No Backup FRU The FRU cannot be
swapped because a
backup FRU is not
installed.
Refer to the product
service manual for
product-specific FRU
information and
procedures. Insert a
backup FRU, and reenter
the command.
Error 73: Port Not
Installed
The specified port is not
installed on the product.
Refer to the product
service manual for
information about
installing a port optic.
Table 6: CLI Error Messages (Continued)
Message Description Action