FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
277CLI Reference Guide for Directors and Edge Switches
Error 74: Invalid Number
of Zones
The specified zone set
contains less than one
zone or more than the
maximum number of
zones allowed for this
product.
The zone set must contain
at least one zone. Add or
remove zones to stay
within the required
number of zones for this
product.
Error 75: Invalid Zone Set
Size
The specified zone set
exceeds the NVRAM
limitations of the director
or edge switch.
Reduce the size of the
zone set to meet the
NVRAM limitations of the
product. Reduce the
number of zones in the
zone set, reduce the
number of members in a
zone, or reduce the zone
name lengths.
Error 76: Invalid Number
of Unique Zone Members
The specified zone
contains more than the
maximum number of
zone members allowed
per zone set for this
product.
Reduce the number of
members in the zone
before reentering the
command.
Error 77: Not Allowed
While Port Is Failed
The specified port is in a
failed or inactive state or
requires service.
Refer to the product
service manual for the
appropriate action.
Error 78: System Error
Light On
This product cannot
beacon because the
system error light is on.
Refer to the product
service manual for the
appropriate procedure.
Clear the system error
light before enabling
beaconing.
Error 79: FRU Failed The specified FRU has
failed.
Refer to the product
service manual for the
appropriate procedure.
Error 81: Default Zone
Enabled
The request cannot be
completed because the
default zone is enabled.
Disable the default zone
before reentering the
command.
Table 6: CLI Error Messages (Continued)
Message Description Action