FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
282 CLI Reference Guide for Directors and Edge Switches
Error 135: Invalid
Number of Fabric
Membership List Entries
The number of fabric
members submitted
exceeds the maximum
allowable entries of 31.
The number of entries in
the Fabric Membership
List is limited to the total
number of domain IDs
available to the fabric.
Make sure that the list
(including the managed
switch) contains no more
than 31 entries.
Error 136: Invalid
Number of Switch
Binding Membership List
Entries
The number of switch
members submitted
exceeds the maximum
allowable entries of 256.
The number of entries in
the Switch Binding
Membership List is limited
to 256. Make sure that
the list (including the
managed switch)
contains no more than
256 entries.
Error 137: Invalid Fabric
Binding State
The fabric binding state
submitted is not
recognized by the CLI.
The fabric binding state
must be set either to
inactive or restrict. For
more information, see
“config.security.fabricBin
ding Commands” on
page 64.
Error 138: Invalid Switch
Binding State
The switch binding state
submitted is not
recognized by the CLI.
The switch binding state
must be set to one of the
following: disable,
erestrict,
frestrict, or
allrestrict. For
more information, see
“Port Number: 4 WWN
Binding: Active Bound
WWN:
AA:99:23:23:08:14:88:
C1” on page 80.
Table 6: CLI Error Messages (Continued)
Message Description Action