FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
283CLI Reference Guide for Directors and Edge Switches
Error 139: Insistent
Domain ID's Must Be
Enabled When Fabric
Binding Active
The user attempted to
disable insistent domain
IDs while fabric binding
was active.
Insistent domain IDs must
remain enabled while
fabric binding is active. If
fabric binding is set to
inactive, the insistent
domain ID state may be
changed. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 140: Invalid
Insistent Domain ID State
The request cannot be
completed because an
invalid insistent domain
ID state has been
submitted.
The insistent domain ID
state must be set to either
enable or disable.
For more information, see
“config.switch.insistDoma
inId” on page 104.
Error 141: Invalid
Enterprise Fabric Mode
The request cannot be
completed because an
invalid Enterprise Fabric
Enterprise Fabric mode
has been submitted.
The Enterprise Fabric
mode must be set to
either activate or
deactivate. For more
information, see
“config.features.enterpris
eFabMode” on page 43.
Error 142: Invalid
Domain RSCN State
The request cannot be
completed because an
invalid domain RSCN
state has been submitted.
The domain RSCN state
must be set to either
enable or disable.
For more information, see
“config.switch.domainRS
CN” on page 103.
Error 143: Domain
RSCNs Must Be Enabled
When Enterprise Fabric
Mode Active
The user attempted to
disable domain RSCNs
while Enterprise Fabric
mode was active.
Domain RSCNs must
remain enabled while the
Enterprise Fabric mode is
active. If Enterprise Fabric
mode is set to inactive,
the domain RSCN state
may be changed. It
should be noted,
however, that this can be
disruptive to the fabric.
Table 6: CLI Error Messages (Continued)
Message Description Action