FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
284 CLI Reference Guide for Directors and Edge Switches
Error 144: The
SANtegrity Feature Has
Not Been Installed
The user attempted to
activate a change to the
fabric security
configuration without first
installing the SANtegrity
feature key.
If this key has not been
installed, contact your
sales representative.
Error 146: Fabric Binding
May Not Be Deactivated
While Enterprise Fabric
Mode Active
The user attempted to
deactivate fabric binding
while Enterprise Fabric
mode was active.
Fabric binding must be
active while operating in
Enterprise Fabric mode.
The fabric binding state
may be changed if
Enterprise Fabric mode is
deactivated. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 148: Not Allowed
While Switch Offline
The switch must be online
to complete this request.
Change the state of the
switch to ONLINE and
re-submit the request.
Error 149: Not Allowed
While Enterprise Fabric
Mode Enabled and
Switch Active
The request cannot be
completed while the
switch is online and
Enterprise Fabric mode is
Active.
This operation will be
valid if the switch state is
set to OFFLINE and
Enterprise Fabric mode to
inactive. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 151: Invalid Open
Systems Management
Server State
The request cannot be
completed because the
OSMS state submitted is
invalid.
The OSMS state may be
set to either enable or
disable. For more
information, see
“config.features.enterpris
eFabMode” on page 43.
Error 152: Invalid FICON
Management Server State
The request cannot be
completed because the
FICON MS state
submitted is invalid.
The FICON MS state may
be set to either enable or
disable. For more
information, see
“config.features.ficonms”
on page 44.
Table 6: CLI Error Messages (Continued)
Message Description Action