FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
288 CLI Reference Guide for Directors and Edge Switches
Error 180: Too many
authentication
management users
Only 25 management
users can be added to the
user database.
Remove other
management users in
order to make room for a
new one.
Error 181: Preferred path
must be disabled
The Preferred Path
feature must be disabled.
Disable the Preferred
Path feature.
Error 182: Source port
must be different than the
exit port
The source and exit ports
cannot be the same.
Configure a preferred
path with different source
and exit ports.
Error 201: Change
Authorization Request
Failed
The switch did not accept
the request to make a
change to NVRAM.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 202: Invalid
Change Authorization ID
The switch will not accept
a change request from
this particular client.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 203: Another Client
Has Change
Authorization
Another user is currently
making changes to this
switch.
Check that all the
parameters are correct,
and reenter the
command.
Error 207: Change
Request Failed
The switch did not accept
the request.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 208: Change
Request Timed Out
The authorization time
allowed to make NVRAM
changes has expired.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Table 6: CLI Error Messages (Continued)
Message Description Action