FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

29CLI Reference Guide for Directors and Edge Switches
Logging In and Logging Out
The CLI allows a single Telnet client to be connected to a director or edge switch.
If a Telnet client logs out, or if after 15 minutes of inactivity the client’s access
times out, another Telnet client may log in. Also note that the Telnet client (user)
must log in any time a director or edge switch is restarted because the current
user’s access is lost. Examples of a restart include an IPL and any power-off
situation.
User Access Rights
The CLI supports two user access rights: administrator and operator. A user who
logs in with administrator access rights can use all of the commands described in
this publication. However, operator access rights grant permission to use only the
perf and show branches of the CLI command tree (for example, the
perf.traffic and show.system commands), as well as the globally
available commands (login, logout, and commaDelim) described in the
following section.