FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
294 CLI Reference Guide for Directors and Edge Switches
Error 235: Unrecognized
Command
The CLI does not
recognize the submitted
command and cannot
perform the help(?)
command as requested.
Refer to “Using the
Command Line Interface
Help” on page 35for
information about the
help command.
Refer to “CLI Commands”
on page 39 for the
correct spelling of the
submitted command.
Ensure that the command
is spelled correctly.
Refer to “Navigation of
the CLI Command Tree”
on page 26. Ensure that
the command has been
entered at the right place
in the CLI command tree,
and then resubmit the
command.
Error 236: Ambiguous
Command
The CLI does not
recognize the submitted
command issued.
The CLI cannot interpret
the command because a
unique match cannot be
identified. For the
appropriate syntax, see
the section of the manual
that corresponds to the
attempted command.
Enter the complete
command and resubmit.
Error 237: Invalid Zoning
Database
An unidentifiable
problem with the zone set
in the local work area
occurred.
Check that all the
parameters of the
command are valid, and
resubmit the command. If
the problem persists,
clear and then reconstruct
the zone set.
Table 6: CLI Error Messages (Continued)
Message Description Action