FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
295CLI Reference Guide for Directors and Edge Switches
Error 238: Invalid
Feature Key
The specified feature key
is invalid.
Check that the feature key
is entered correctly, and
resubmit the command. If
the problem persists,
contact your service
representative.
The message that is
returned is a string that
includes both the error
number and the text of
the message.
Error 239: Fabric binding
entry not found
The user requested to
remove a fabric binding
entry that is not in the
pending Fabric
Membership List.
Verify that the correct
entry (both WWN and
Domain ID) is being
requested for removal
from the list and
re-submit the request.
Error 240: Duplicate
fabric binding member
The user requested to add
an entry to the Fabric
Binding List that is
already a member of the
list.
Verify that the correct
entry (both WWN and
Domain ID) is being
requested for addition to
the list and re-submit the
request.
Error 241:
Comma-delimited mode
must be active
Comma-delimited mode
must be active to execute
this command.
Some commands require
that comma-delimited
mode be active (for
example,
show.nameServerExt.
Enable comma-delimited
mode and re-issue the
command.
Error 242: Open trunking
threshold % value must be
0–99
An invalid threshold
percentage has been
entered.
The Open trunking
threshold must be in the
range 0–99. Make sure
all values are valid and
resubmit the request.
Error 243: Not allowed
while S/390 Mode is
Enabled
This operation is not
allowed while S/390
mode (FICON
management style in
HAFM) is enabled.
This command is not valid
for the S/390
environment (FICON
management style in
HAFM).
Table 6: CLI Error Messages (Continued)
Message Description Action