FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
296 CLI Reference Guide for Directors and Edge Switches
Error 244: Not allowed
while Enterprise Fabric
Mode is Active and
Switch is Online
This operation is not
allowed while the switch
is in Enterprise Fabric
mode and the switch is
online.
Make sure Enterprise
Fabric mode is not
enabled and the switch is
offline.
Error 245: Invalid
increment value
The increment value
specified is not between 1
and 70560.
Make sure the increment
value given is between 1
and 70560.
Error 246: Invalid interval
value
The interval value
specified is not between 5
and 70560 minutes.
Make sure the increment
value given is between 5
and 70560 minutes.
Error 247: Invalid counter
number
The counter specified is
not a valid number.
Use the table shown by
the command
perf.counterThresh
Alerts.showStatist
icsTable to find a
valid counter value.
Error 248: A counter
must be assigned to this
threshold alert
A counter must be
assigned to an alert
before it is enabled.
Use the
perf.counterThresh
Alerts.setCounter
command to set a counter
before the alert is
enabled.
Error 249: At least one
port or port type must be
added to this threshold
alert
A port or port type must
be assigned to an alert
before it is enabled.
Use the
perf.counterThresh
Alerts.addPort
command to add a port
before the alert is
enabled.
Error 250: Invalid counter
threshold alert name.
The name specified for
the alert is not valid.
A counter threshold alert
with the specified name
does not exist.
Error 251: The threshold
alert must be disabled
The counter threshold
alert to be
modified/deleted is
already enabled.
Disable the threshold
alert and then try the
command again.
Error 252: Not Allowed
While the Pending Fabric
Binding State is Set to
Inactive
The pending fabric
binding set must be set to
Restrict in order to
edit the pending Fabric
Binding List.
Set the pending fabric
binding state to
Restrict.
Table 6: CLI Error Messages (Continued)
Message Description Action