FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Error Messages
297CLI Reference Guide for Directors and Edge Switches
Error 253: Cannot
Remove a Member
Currently Interacting with
the Fabric
Current members of the
fabric must be included in
the Fabric Binding List.
Do not remove active
fabric members from the
pending Fabric Binding
List.
Error 254: A utilization
type must be assigned to
this threshold alert
A utilization type must be
set before activating this
threshold alert.
Add a utilization type
and then the threshold
alert can be activated.
Error 255: Invalid
throughput threshold alert
name
The name of the threshold
alert is incorrect.
Either the name does not
exist, or the new name
cannot be used because it
is illegal or a duplicate.
Error 256: Invalid
utilization type number
The utilization type
number does not exist.
Select a valid utilization
type number.
Error 257: Invalid
utilization percentage
value
The utilization percentage
value is out of range.
Select a valid utilization
percentage value.
Error 258: Invalid
duration value
The duration value in
minutes is out of range.
Select a valid duration
value.
Error 259: Invalid
threshold alert name
The name of the threshold
alert is incorrect.
The threshold alert name
does not exist.
Error 260: Not Allowed
while SANtegrity feature
is not installed on any
remote switch
All switches in the fabric
must have the SANtegrity
feature key installed.
Install the SANtegrity
feature key on all
switches in the fabric.
Error 261: No Attached
Members Exist
There are no members
attached to the switch.
Check all connections
and make sure attached
devices are present
Error 262: All Attached
Members are in the
Membership List
All attached fabric
members are already in
the membership list.
This action is redundant,
all members are already
in the list.
Error 263: The
SANtegrity
Authentication feature
key is not installed
The SANtegrity
Authentication feature
key is not installed.
Install the SANtegrity
Authentication feature
key.
Table 6: CLI Error Messages (Continued)
Message Description Action