FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Introduction

30 CLI Reference Guide for Directors and Edge Switches

Syntax

Purpose

This command allows a Telnet client to connect to a director or edge switch.

Description

This command allows the user to log in with either administrator or operator

access rights. The default password is password. The login command is called

automatically by the CLI each time a new Telnet session is activated, as well as

each time new administrator access rights are configured.

After the login command is issued, the Username: prompt automatically

displays. After a valid user name is entered, the Password: prompt

automatically displays. After the corresponding valid password is entered, the

Root> prompt displays. At this prompt the user may enter any of the commands

included in Table 3.

A user name and password can be set by the administrator through the

config.security.userRights.administrator command or through

the config.security.userRights.operator command.

The access rights chosen for the CLI are completely independent of the other

product interfaces, for example, SNMP or Hewlett-Packard (HP) product

interfaces.

Parameters

This command has no parameters.

Command Examples

Username: Administrator

Password: password

Username: Operator

Password: password