FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

Introduction
34 CLI Reference Guide for Directors and Edge Switches
Handling Command Line Interface Errors
Two types of errors detected by the CLI are:
■ An error associated with the interface. For example, a keyword is misspelled
or does not exist.
Root> confg
Error 234: Invalid Command
■ An error associated with a fabric, director, or edge switch. For example, a
parameter error is detected by a switch, where port 24 is entered for a switch
that supports only 16 ports.
Root> config port name 24 “Port 24"
Error 248: Invalid Port Number
In either case, the command is ignored. The CLI remains at the point it was before
the command was entered. The error messages, including error number and error,
are listed in “Error Messages” on page 269.