FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

commaDelim
35CLI Reference Guide for Directors and Edge Switches
Using the Command Line Interface Help
The question mark (?) can be used within a command to obtain certain
information:
■ If the question mark is used in place of a command keyword, all the keywords
at that level of the CLI command tree display.
Root> config system ?
Command identified
contact - Set the system contact attribute
date - Set the system date and time
description - Set the system description attribute
location - Set the system location attribute
name - Set the system name attribute
show - Display the system configuration
■ If the question mark is used at the end of a recognized command, any
parameters for that command display.
Root> config port name ?
- name <portNumber> <portName>
■ If the question mark is used after one or more characters of a keyword, any
keywords at that level of the CLI command tree display.
Root> config s?
security snmp switch system