FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.features.enterpriseFabMode
43CLI Reference Guide for Directors and Edge Switches
Syntax
enterpriseFabMode enterpriseFabModeState
Purpose
This command sets the Enterprise Fabric mode state for the fabric. The
SANtegrity feature key must be installed to activate the Enterprise Fabric mode
state.
Parameters
This command has one parameter:
Command Example
Root> config features enterpriseFabMode 1
Note: The command “config.enterpriseFabMode.setState” on page 42 has
functionality that is identical to this command.
config.features.enterpriseFabMode
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.