FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.features.installKey
45CLI Reference Guide for Directors and Edge Switches
Syntax
installKey featureKey
Purpose
This command allows the user to install a feature set that is enabled by the
provided feature key. The switch can be either offline or online when the
command is executed.
Note: If any currently installed features are being removed by the new feature key, the
switch must be offline when the command is given.
Parameters
This command has one parameter:
Command Example
Root> config features installKey AaBb-CCdD-eeFF-gH
config.features.installKey
featureKey Specifies the key you have received to enable an
optional software feature on a specific product. A
feature key is a string of case-sensitive,
alphanumeric ASCII characters.
The number of characters may vary in the format;
however, the key must be entered exactly,
including the hyphens. An example of a feature key
format is XxXx-XXxX-xxXX-xX.