FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
46 CLI Reference Guide for Directors and Edge Switches
Syntax
OpenSysMS osmsState
Purpose
This command sets the enabled state of the Open Systems Management Server.
The Open Systems Management Server feature key must be installed in order to
enable the OSMS State.
Parameters
This command has one parameter:
Command Example
Root> config features OpenSysMS 1
Note: The command “config.openSysMS.setState” on page 53 has functionality that
is identical to this command.
config.features.OpenSysMS
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values
are enable and disable. Boolean 1 and 0
may be substituted as values.