FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.features.opentrunking
47CLI Reference Guide for Directors and Edge Switches
Syntax
opentrunking openTrunkingState
Purpose
This command sets the enabled state of the OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open trunking.
Parameters
This command has one parameter:
Command Example
Root> config features opentrunking 1
Note: The command “perf.opentrunking.setState” on page 165 has functionality that
is identical to this command.
config.features.opentrunking
openTrunkingState This parameter can be set to enable or
disable the OpenTrunking feature. Boolean
1 and 0 may be substituted as values.