FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
50 CLI Reference Guide for Directors and Edge Switches
Syntax
setState ficonmsState
Purpose
This command sets the enabled state of the FICON Management Server. The
FICON Management Server feature key must be installed in order to enable the
FICON Management Server State. (The Edge Switch 2/24 does not accept this
command.)
Note: If the FICON Management Server is enabled, the default management style is
the FICON management style. The Open Systems management style cannot be used.
Parameters
This command has one parameter:
Command Example
Root> config ficonms setState 1
Note: The command “config.features.ficonms” on page 44 has functionality that is
identical to this command.
config.ficonms.setState
ficonmsState Specifies whether the FICON Management
Server is enabled. Valid values are enable
and disable. Boolean 1 and 0 may be
substituted as values.