Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
51525354555657585960
config.ip.ethernet
51CLI Reference Guide for Directors and Edge Switches
Syntax
ethernet ipAddress gatewayAddress subnetMask
Purpose
This command sets the Ethernet network settings.
Description
The Telnet connection can be lost when these Ethernet network settings are
changed.
If the IP address is reconfigured, your Telnet client must be reconnected to the
new IP address. A new login will be requested.
Parameters
This command has three parameters:
Command Example
Root> config ip ethernet 10.0.0.0 0.0.0.0 255.0.0.0
config.ip.ethernet
ipAddress Specifies the new IP address for the director or
edge switch. The address must be entered in
dotted decimal format (for example, 10.0.0.0).
gatewayAddress Specifies the new gateway address for the
Ethernet interface. The address must be entered
in dotted decimal format (for example,
0.0.0.0).
subnetMask Specifies the new subnet mask for the Ethernet
interface. The address must be entered in
dotted decimal format (for example,
255.0.0.0).