FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.openSysMS.setState
53CLI Reference Guide for Directors and Edge Switches
Syntax
setState osmsState
Purpose
This command sets the enabled state of the Open Systems Management Server.
The Open Systems Management Server feature key must be installed in order to
enable the OSMS State.
Parameters
This command has one parameter:
Command Example
Root> config OpenSysMS setState 1
Note: The command “config.features.OpenSysMS” on page 46 has functionality that
is identical to this command.
config.openSysMS.setState
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values
are enable and disable. Boolean 1 and 0
may be substituted as values.