FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.port.extDist
55CLI Reference Guide for Directors and Edge Switches
Syntax
extDist portNumber extDistOn
Purpose
This command sets the extended distance state for a port. (The Edge Switch 2/24
does not accept this command.)
Description
When the extended distance field is true, the port is configured for 60 buffer
credits, which supports a distance of up to 100 km for a 1 gigabit per second
(Gbps) port.
Parameters
This command has two required parameters:
Command Examples
Root> config port extDist 4 false
Root> config port extDist 4 0
config.port.extDist
portNumber Specifies the port number. Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
extDistOn Specifies the extended distance state for the
port. Valid values are true and false.
Boolean 1 and 0 may be substituted as values.