FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.port.show
59CLI Reference Guide for Directors and Edge Switches
Output Example
The output from the config.port.show command displays as follows.
Port Number: 4
Name: HP4 tape drive
Blocked: false
Extended distance: false
Type: F Port
Speed: 2 Gb/sec
Extended
Distance
The extended distance configuration state. Valid values are
true and false. This field is not valid for the Edge
Switch 2/24.
FAN The fabric address notification (FAN) state. Valid values
are true and false. (Edge Switch 2/24 only.)
Type The port type. Valid values are F Port, E Port,
GPort, Fx Port (Edge Switch 2/24 only), and
Gx Port (Edge Switch 2/24 only).
Speed The port speed. Valid values are 1 Gb/sec, 2 Gb/sec,
and Negotiate.