Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
61626364656667686970
config.security.fabricBinding.activatePending
67CLI Reference Guide for Directors and Edge Switches
Syntax
activatePending
Purpose
This command activates the fabric binding configuration contained in the pending
work area to the fabric. Members that are attached remain in the list, because the
Pending FBML must contain all attached members to become active.
Note: This command takes effect immediately. The CLI verifies the list before activating
it to the fabric and adds the managed switch to the list, if it is not already present.
Parameters
This command has no parameters.
Command Examples
Root> config security fabricBinding activatePending
config.security.fabricBinding.activatePending