FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.fabricBinding.addMember
69CLI Reference Guide for Directors and Edge Switches
Syntax
addMember wwn domainId
Purpose
This command adds a new member to the Fabric Membership List in the pending
fabric binding work area. The number of entries is limited to the maximum
available domain IDs for the fabric (31).
Note: Changes from this command are not activated to the fabric until the
activatePending command is issued.
Parameters
This command has two parameters:
Command Examples
Root> config security fabricBinding addMember
AA:99:23:23:08:14:88:C1 2
config.security.fabricBinding.addMember
wwn Specifies the World Wide Name (WWN) of the
member to be added to the Fabric Membership
List. The value of the WWN must be in
colon-delimited hexadecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
domainId The domain ID of the member to be added to the
Fabric Membership List. Valid domain ID's range
from 1 to 31.