FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
70 CLI Reference Guide for Directors and Edge Switches
Syntax
clearMemList
Purpose
This command clears the Fabric Membership List for the pending fabric binding
working area. Members that are attached remain in the list, because the Pending
FBML must contain all attached members to become active.
Note: This information is not saved to the fabric until the activatePending
command is issued. When the list is cleared, the CLI automatically adds the managed
switch to the Fabric Membership List.
Parameters
This command has no parameters.
config.security.fabricBinding.clearMemList