FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
72 CLI Reference Guide for Directors and Edge Switches
Syntax
deleteMember wwn domainId
Purpose
This command removes a member from the Fabric Membership List in the
pending fabric binding work area. The local member and attached members
cannot be deleted from the list.
Note: Changes are not activated to the fabric until the activatePending
command is issued.
Parameters
This command has two parameters:
Command Examples
Root> config security fabricBinding deleteMember
AA:99:23:23:08:14:88:C1
Root> config security fabricBinding deleteMember 2
config.security.fabricBinding.deleteMember
wwn Specifies the WWN of the member to be removed
from the Fabric Membership List. The value of the
WWN must be in colon-delimited hexadecimal
notation (for example,
AA:00:AA:00:AA:00:AA:00).
domainId The domain ID of the member to be removed from
the Fabric Membership List. Valid domain ID's
range from 1 to 31.