FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
74 CLI Reference Guide for Directors and Edge Switches
Syntax
showActive
Purpose
This command displays the fabric binding configuration (active FBML) saved on
the fabric. It performs the same function as “show.security.fabricBinding” on
page 250.
Parameters
This command has no parameters.
Output
This command displays the following fabric binding configuration data:
Output Example
The output from the config.security.fabricBinding.showActive
command displays as follows:
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.fabricBinding.showActive
Domain ID The domain ID of the FBML member. Valid
domain ID's range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment Status Indicates whether the FBML member is
Local, Attached, or Unattached. For
more information, see “Fabric Binding
Membership Terminology” on page 65.