FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.fabricBinding.showPending
75CLI Reference Guide for Directors and Edge Switches
Syntax
showPending
Purpose
This command displays the fabric binding configuration in the pending working
area and has not yet been activated to the fabric. If no changes have been made to
the pending environment, the CLI displays the active membership list.
Parameters
This command has no parameters.
Output
The fabric binding configuration data is displayed as a table that includes the
following properties:
Output Example
The output from the config.security.fabricBinding.showActive
command displays as follows:
Fabric Binding State: Active Restricting
Domain 1 (00:11:22:33:44:55:66:77)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF)
Domain 14 (11:55:35:45:24:78:98:FA)
config.security.fabricBinding.showPending
Fabric Binding State The active fabric binding state:
Inactive or Active
Restricting
Fabric Membership List The active Fabric Membership List.