FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.portBinding.bound
77CLI Reference Guide for Directors and Edge Switches
Syntax
bound portNumber portBindingState
Purpose
This command sets the port binding state for a given port.
Parameters
This command has two parameters:
config.security.portBinding.bound
portNumber Specifies the port number for which the port binding
state is being set. Valid port number values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
portBindingState Specifies the port binding state as active or inactive.
Valid values are true and false.
The true parameter sets the port binding to active.
The specified port will be bound to the WWN
configured with the
config.security.portBinding.wwn
command. If no WWN has been configured, no
devices can log in to that port.
The false parameter sets the port binding to
inactive. Any device is free to connect to the specified
port in this state, regardless of the WWN setting.
Boolean 1 and 0 may be substituted as values.