FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.portBinding.show
79CLI Reference Guide for Directors and Edge Switches
Syntax
show portNumber
Purpose
This command shows the port binding configuration for a single port.
Parameters
This command has one parameter:
Command Example
Root> config security portBinding show 4
Output
The port binding configuration date is displayed as a table that includes the
following properties:
config.security.portBinding.show
portNumber Specifies the port number for which the port binding
configuration will be shown. Valid values are:
0–11 for the Edge Switch 2/12
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Port Number The port number.
WWN Binding The state of port binding for the specified port, either
active or inactive.
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device has
been bound to the specified port.