FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.switchBinding.deleteMember
85CLI Reference Guide for Directors and Edge Switches
Syntax
deleteMember wwn
Purpose
This command removes a member from the Switch Binding Membership List.
The user cannot remove a member that is currently logged into the switch.
Parameters
This command has one parameter:
Command Examples
Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.deleteMember
wwn Specifies the switch or N-Port device WWN of the
member to be removed from the Switch Binding
Membership List. The value of the WWN must be in
colon-delimited hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00). The user may also
enter all for this argument to clear the Switch
Binding Membership List completely. Note that the
user cannot clear a WWN that is currently logged into
the switch.