FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
86 CLI Reference Guide for Directors and Edge Switches
Syntax
setState switchBindingState
Purpose
This command sets the switch binding state on the switch.
Parameters
This command has one parameter:
config.security.switchBinding.setState
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable — Disable switch binding.
Devices (servers, storage, and other
switches) are allowed to connect to the
switch without restrictions.
eRestrict — Enable switch binding and
restrict E_Port connections. E_Ports are
prevented from forming ISL connections
unless explicitly identified in the Switch
Binding Membership List. F_Port
connections are allowed without restriction.
fRestrict — Enable switch binding and
restrict F_Port connections. Server and (or)
storage devices are prevented from forming
F_Port connections with the switch unless
explicitly identified in the Switch Binding
Membership List. E_Ports are allowed to
form ISL connections without restriction.
allRestrict — Enable switch binding
and restrict E_Port and F_Port connections.
Both E_Ports and F_Ports prohibit
connections with all devices unless
explicitly identified in the Switch Binding
Membership List.